V TYPE SILO TRAILER
Silo Trailer Technical Specifications: |
|
Silo Trailer Capacity |
For 3 axles: 35,500 kg (Maximum loaded weight)* For 4 axles: 43,500 kg (Maximum loaded weight)** For 2 axles: 27,500 kg (Maximum loaded weight)*** |
Silo Trailer Type |
3-Axle Silo Trailer (V-Type) (Standard or Vacuum Silo version) |
Silo Trailer Weight (Empty) |
6.500 Kg - 8.700 Kg |
Number of Axles |
3 x 12 tons - 3 x 9 tons |
Number of Tires and Size |
6 units* 385/65 R 22.5 |
Chassis |
The silo trailer is designed with high-strength steel in an "I" profile, using gas shielded welding machines, taking into account overloading, in accordance with its intended use and transport capacity. The material quality used is the standard ST 52. |
Body (Tank) Material |
It is produced from standard 3mm, 3.5mm, and 4mm ST37 material. Optionally (for weight reduction), aluminum material is also used. In the Vacuum Silo Trailer (Suction-Pressure) models, the body thickness is 5mm. |
Brakes |
The air brake ratchets are automatic. The brand is according to the customer's request. |
Compressor and Drive System |
The compressor used is the Globaltech brand, available with 2 or 3 heads. The compressor drive system is provided by an electric motor (380 Volt AC) or a diesel engine (new or refurbished). In the vacuum models, the compressor is the imported German brand "Wolf". |
Manhole Cover and Filling |
The silo trailer is equipped with 2 or 3 manhole covers (for top-loading discharge) according to the volume. In the vacuum-type trailer (suction-pressure) models, the loading is done through pipes equipped with optional 3-inch or 4-inch filters (suction-driven by the compressor). |
Accessories |
The entire fender (Plastic), water tank, tire support block, plastic tool cabinet, manometer (shows the suspension bellows pressure. Based on this, the weight of the load can be estimated), aluminum bicycle guard. |
V-Type Cement Silo Trailer Dimensions |
|
Total Length |
8000 mm - 12000 mm |
Silo Trailer Capacity (Volumetric) |
22 m3- 25 m3 -(28 m3- 30 m3- 32 m3- 35 m3)* -40 m3- 45 m3 - 50 m3 |
Width |
2550 mm |
Total Height |
3600 mm - 4000 mm |
Electrical System |
The used components are compliant with European standards, certified by EEC 24. |
Legs (Support Legs) |
2X 24-ton capacity dual-gear mechanical legs. OMS brand. |
Paint (Coating) |
Two coats of epoxy primer are applied, followed by the desired color of acrylic paint as the final coat. |
King Pin |
Made of forged steel, with 2" or 3.5" flanged, bolted connections, resistant to high levels of tensile fractures. It can be easily replaced due to the screw connections. E-certified. |